Tank Container 20FT ISO T11 UN Portable

Delltank offers a full range of T11 24/25/26,000-litre ISO Tank Containers for leasing. All tanks have the highest-quality design and construction and strictly conform to the latest international approvals.

ISO Tank Container

Delltank offers T11 Type 24/25/26,000-litre ISO Tank Containers.

Our tank container fleet is divided into four categories: tank containers for liquid chemical products, tank containers exclusively for liquid food products, and tank containers for bitumen and liquid fuel products.

All tanks have the highest-quality design and construction and strictly conform to the latest international approvals.

Customer-orientated, flexible service
Complete range of capacities and types
Top-quality design and construction
Tanks are available from central locations.
Available for sale and lease

Why use ISO tanks?

Tanks deliver real-time and labor savings while making door-to-door transport smooth. Loaded and discharged using standard in-plant liquid transfer systems, tanks are lifted using standard ISO equipment. Switching between road, rail, and sea or storage at a destination is safe, straightforward, and economical. T11 tanks are approved to the highest standards by international statutory authorities for the safe transportation of a wide range of liquid products and, in particular, the following:

Liquids

with a flashpoint of less than 0° C
Certain high-hazard toxins or corrosives
Spontaneously combustible materials
Cargoes that are dangerous when exposed to moisture
Oxidizing substances

Please note that in certain exceptional cases, Delltank containers may have specifications that differ from the descriptions above.

Also, cargo in a container must comply with the host country's dimensional regulations and laws; thus, payload capacity may be affected.

For more information or assistance, please contact our customer service.

Approvals by Lloyd's Register, the Netherlands

ISO TANK: 25000-Litre T11 UN Portable

6058mm x 2438mm x 2591mm, General Purpose Tank Container

6.0 bar test pressure, 4 bar working pressure, insulated, steam heated.

Year manufactured: "New Build"

Dimensions:
	Metric	Imperial
Capacity	25000 LTR	5500 US GALLONS
Maximum Gross Weight	34000 KG	74957LBS
Tare	3680KG	8113 LBS
Construction:
Working Pressure	4.0 bar	58 psi
Test Pressure	6.0 bar	87 psi
Steam Working Pressure	4.0 bar	58 psi
Steam Test Pressure	6.0 bar	87 psi
Relief Valve Set Pressure	4.4 bar	63 psi
Ambient Temp. Range	-40°C to +65°C	-40°F to +149°F
Maximum Cargo Temp	130°C	248°F
Shell Material	Stainless steel, ASTM A240 316 / 316L low carbon <0.03% DIN 17441 w1.4401. Cold rolled shell 2B finish. According to regulations, the thickness is a nominal 4.2mm shell +0.1 mm corrosion allowance, 4.65 mm ends, and equivalent to 6mm mild steel.
Design Code / Approvals	ASME, Section VIII, Division 1 where applicable and IMDG T11, US DOT CFR 49 T11, ADR, RID, UIC, CTC, AAR, CSC, TIR. ISO.
Standard Fittings:
Manlid	500mm (20") diameter, 8-point fixing, 14mm x 12mm seal.
Calibration	Volumetric stainless steel chart.
Airline / Vapour	40mm (1½") ball valve Fort Vale, outlet 1½ " BSP, stainless steel screw cap.
Relief Valve	80mm (3") DN65 flanged Fort Vale Mk111 super maxi high flow, operating pressure 4.4 bar, weld-in flange-plugged provision for a second flanged valve.
Top Outlet	Blanked weld-in flange drilled 6 M12 holes @ 168 pcd, provision for optional fitting of 80mm (3") stainless steel butterfly valve. DN80, ASA 150 bolted blank flange outlet, 80mm (3") removable full-length siphon tube.
Bottom Discharge	80mm(3") guard high-lift foot valve, and FV clamped 80mm (3") butterfly valve—outlet 3" BSP screw thread and cap.
Remote Closure	The bottom valve closure device is fitted with a fusible link.
Gaskets & Seals	Parts in contact with cargo, PTFE/Teflon.
Steam Heating	7.5m² (80'²) effective surface area, eight external steam ducts, ¾" BSP screw inlet/outlet and cap. Maximum pressure: 4 bars. Tank max temperature 130°C.
Insulation	50mm (2") total comprising 50mm mineral wool 55 kg/m3 (CFC free) semi-rigid stiffened at the top and covered by 0.8mm grade 5251 H44 aluminum pre-painted cladding, estimated thermal value 37 Kcal/hr at 30°C.
Compartment	Open stainless steel spill compartments with provision for optional lids.
Document Holder / Earth	It is fitted at the rear end and suitable for shipping papers, MSDS, etc. Earth is located at the rear.
Data Plate / Markings	Data Plate / Markings.
Walkway	The aluminum Q grating extends to the front end, providing access to the top fittings. An optional handrail and ladder are available on the right-hand side of the rear.
Temperature Gauge	80mm dia dual scale -20°C to 200°C / 0 to 400°F.